-40%
Water temp sender, temperature sender, low match, cut to length, 1/8" thread
$ 5.28
- Description
- Size Guide
Description
Temp sender for water or oil.Temp range: 100 - 240F, low match. Normally used in water temp.
Output (connect to gauge): 240 - 33 ohms, Stewart-Warner standard.
1/8" NPT thread mounting, 1/2" long for thread portion. See our fitting set for other thread size below.
Blade connection, with socket and sleeve included
.
0.9” long probe, can be cut to 0.55” probe length, there is a cutting gap on the probe for easy cutting.
Total 1.3" long below hex head without cutting.
Probe diameter: 0.3".
The probe is supposed always to touch the measuring fluid, so cut to proper length is important for accurate measurement.
For matching gauges, see below link:
stores.ebay.com/industrialstuffs/1921055017
stores.ebay.com/industrialstuffs/16612838017
Temp (F)
Temp(
℃
)
ohms
100
37.8
247
140
60
130
150
65.6
112
160
71.1
97
180
82.2
74
200
93.3
57.3
240
115.6
35.8
250
121.1
32.2
For different thread size, 1/4", 3/8", 1/2" NPT, see blow:
www.ebay.com/itm/-/272326336606
We will give you .00 refund if you buy the above fitting set.
For other temp senders, see:
stores.ebay.com/Industrialstuffs/4491721017