Water oil temp sender, high match 140-280F, w/sealed plug 10' harness cutable

Description

Water or oil temp sender, high match 140-280F, w/sealed plug wire harness.
The harness is 10' (120" or 3.05 meter) long, UL approved cable.
Temp range: 140 - 280F, high match, normally used in oil (transmission) temp.
Output (connect to gauge): 240 - 33 ohms, Stewart-Warner standard.
1/8"-27 NPT thread mounting, 1/2" long for thread portion. See our fitting set for other thread size below.
Weather pack sealed quick disconnect, wire harness included.
3/4" hex size.
0.9” long probe, can be cut to 0.55” probe length, there is a cutting gap on the probe for easy cutting.
Total 1.3" long below hex head without cutting.
Wiring: red for signal, black for ground. Black wire also can be connected to chassis for grounding.
For matching gauges, see below link:
stores.ebay.com/industrialstuffs/1921055017
stores.ebay.com/industrialstuffs/16612838017
For different thread size, 1/4", 3/8", 1/2" NPT, see blow:
www.ebay.com/itm/-/272326336606
We will give you .00 refund if you buy the above fitting set.
For other temp senders, see:
stores.ebay.com/Industrialstuffs/4491721017