Kit 23PCS 4WD FWD Front Wheel Drive Bearing Adapters Puller Install Removal Tool

Description

Dear customer，
after the item shipped,if you have the following issue,Missing parts or pieces,Wrong item sent, Arrived Damaged, Not as described,Not working or defective and Not authentic, before you choose open a return or case, pls send messages to contact us , we will reply you in 1 business day, trust we will well solve those issues.
Thank you
1 YEAR WARRANTY
Feature
· Made of high quality carbon steel material with black oxide finish, anti-rust and corrosion-resistant, durable and sturdy to use.
· Tool set is designed for the removal and installation of wheel bearings on front-wheel drive vehicles. Also suitable for removing & installing large industrial bearings.
· Eliminates the need for a front end alignment while also reducing the damage done to the hub and bearings.
· Can be used with an impact wrench or workshop press. Coming with a handy case, easy to transport.
· Drift size: 73.2, 70.7, 71.9, 73.8, 74.7, 77.5, 83.9, 81.6, 82.5, 102, 88.5, 67, 63.5 and 55.8mm, drive shaft size: 32mm & 38mm.
Specifications
· Condition:  New Brand
· Application: fits front wheel drive cars and small trucks
· Material: carbon steel for tools, ABS plastic for case
· Dimensions: 17.7 x 12.2 x 4.1 in.
· Item Weight: 24 lb.
· Drift Size: Approx. 73.2mm (2.9inch), 70.7mm (2.8inch), 71.9mm (2.8inch), 73.8mm (2.9inch), 74.7mm (2.9inch), 77.5mm (3.1inch), 83.9mm (3.3inch), 81.6mm (3.2inch), 82.5mm (3.2inch), 102mm (4.0inch), 88.5mm (3.5inch), 67mm (2.6inch), 63.5mm (2.5inch) and 55.8mm (2.2inch)
· Drive Shaft Size: Approx. 32mm (1.3inch) & 38mm (1.5inch)
Operation
Step.1
Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2
Assemble the tool components, and press out the worn bearing.
Step.3
Lightly lubricate the new bearing, and position it for installation with the tool components assembled.
Press the bearing into the spindle assembly until it bottoms.
Step.4
Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5
Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires
NOTE：Case color may vary.
Shipping Policy
Return Policy
Customer Service
About US
Shipping Policy
· Handling time: 1 day
· Shipping time: 1- 6 business days in USA. After shipping, the tracking No. available by message
· We ship to eBay address
Return Policy
· The return should including an RMA number
· Refund is valid within 60 days after the date delivered
· Refund will be given as money back or replacement
· The money less the freight cost will be refunded due to their own fault
· Item must be returned in original packing same as reached
· Buyers are responsible for the return shipping cost due to their own fault
· We will not refund any labor cost and we only refund the order value
Customer Service
· Any question will be replied within 24 hours except the weekend and holiday
· If any problem occurs, please contact with us at the first time.Then we will try our best to solve the problem to your satisfaction
About US
· Manufacture: 20 years auto parts experience
· Constant pursuit: Professional technology, quality products and sincere service
· Purpose: Bringing Customers a nice online shopping experience
Store Categories
Store Categories
LED Car Lamp
M270 Series
C9 Series
O280 Series
265 Series
A80
G10
290 Series
HID Lamp
Fuel Pump
Mass Air Flow Sensor
Oxygen Sensor
Fuel Injector
Distributor
Secondary Air Pump
Door lock Actuator
Water Pump
Shock absorber
Towing mirror
Radiator Fan
Clock Spring
Injectors Plug Adapters
Idle Air Control Valve
Wheel Hub
Carburetor
Ignition Coils
Cruise Control Switch
ABS Sensor
Tail Lights
Headlights
Ignitioin wire
Tool
Other
Dear customer，
after the item shipped,if you have the following issue,Missing parts or pieces,Wrong item sent, Arrived Damaged, Not as described,Not working or defective and Not authentic, before you choose open a return or case, pls send messages to contact us , we will reply you in 1 business day, trust we will well solve those issues.
Thank you
1 YEAR WARRANTY
Feature
· Made of high quality carbon steel material with black oxide finish, anti-rust and corrosion-resistant, durable and sturdy to use.
· Tool set is designed for the removal and installation of wheel bearings on front-wheel drive vehicles. Also suitable for removing & installing large industrial bearings.
· Eliminates the need for a front end alignment while also reducing the damage done to the hub and bearings.
· Can be used with an impact wrench or workshop press. Coming with a handy case, easy to transport.
· Drift size: 73.2, 70.7, 71.9, 73.8, 74.7, 77.5, 83.9, 81.6, 82.5, 102, 88.5, 67, 63.5 and 55.8mm, drive shaft size: 32mm & 38mm.
Specifications
· Condition:  New Brand
· Application: fits front wheel drive cars and small trucks
· Material: carbon steel for tools, ABS plastic for case
· Dimensions: 17.7 x 12.2 x 4.1 in.
· Item Weight: 24 lb.
· Drift Size: Approx. 73.2mm (2.9inch), 70.7mm (2.8inch), 71.9mm (2.8inch), 73.8mm (2.9inch), 74.7mm (2.9inch), 77.5mm (3.1inch), 83.9mm (3.3inch), 81.6mm (3.2inch), 82.5mm (3.2inch), 102mm (4.0inch), 88.5mm (3.5inch), 67mm (2.6inch), 63.5mm (2.5inch) and 55.8mm (2.2inch)
· Drive Shaft Size: Approx. 32mm (1.3inch) & 38mm (1.5inch)
Operation
Step.1
Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2
Assemble the tool components, and press out the worn bearing.
Step.3
Lightly lubricate the new bearing, and position it for installation with the tool components assembled.
Press the bearing into the spindle assembly until it bottoms.
Step.4
Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5
Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires
NOTE：Case color may vary.
Shipping Policy
Return Policy
Customer Service
About US
Shipping Policy
· Handling time: 1 day
· Shipping time: 1- 6 business days in USA. After shipping, the tracking No. available by message
· We ship to eBay address
Return Policy
· The return should including an RMA number
· Refund is valid within 60 days after the date delivered
· Refund will be given as money back or replacement
· The money less the freight cost will be refunded due to their own fault
· Item must be returned in original packing same as reached
· Buyers are responsible for the return shipping cost due to their own fault
· We will not refund any labor cost and we only refund the order value
Customer Service
· Any question will be replied within 24 hours except the weekend and holiday
· If any problem occurs, please contact with us at the first time.Then we will try our best to solve the problem to your satisfaction
About US
· Manufacture: 20 years auto parts experience
· Constant pursuit: Professional technology, quality products and sincere service
· Purpose: Bringing Customers a nice online shopping experience