22100 Flywheel Locking Tool 36mm 12 Point 3/4’’ Socket for 6.6L Duramax

Description

22100 Flywheel Locking Tool for 6.6L Duramax
1.
Fitment:
Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
2. Function:
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
3. Duramax 2500 / 3500 Pickups (Toothed pieces only):
Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
4. Duramax 4500 / 5500 Trucks (Toothed pieces with screws):
Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
5. 36mm 12-point Socket:
Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle.
Flywheel Holder:
Locks the flywheel to the transmission when changing water pump.
Time Saver:
When removing the harmonic balancer, locking the flywheel is faster than taking off the starter.
Locks Firmly:
Easy to install and effectively keeps the flywheel from turning.
Fitment:
Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
Function:
Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
Superior Material:
Made of CRV steel, which is heavy duty and is able to anti-rust and resist corrosion, excellent solid and durable.
Duramax 2500 / 3500 Pickups
(Toothed pieces only)
Removes metal spring-loaded inspection plate on the bottomof the transmission.
Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
Duramax 4500 / 5500 Trucks
(Toothed pieces with screws)
Remove the rubber inspection cap on the bottom of the transmission.
Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
36mm 12-point Socket
Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation.
36mm 12 point socket can also be used on axle.